Computer And Technology

In these blog you will get information about how to make bootable pendrive, N+ , data sharing, cmd related function and other types of courses and technology

Wednesday, 6 February 2019

RIP:-Routing Information Protocol

Million Things 06:24 No comments :

RIP:-Routing Information Protocol 
    1.   It is Dynamic routing Protocol
    2.   It is also called as Distance Vector Routing Protocol
    3.   RIP is update the routing table and connect the network
    4.   This routing table update in every 15 sec.
    5.   R.I.P max. hop count is 15(Network Support)



Now Configure RIP Dynamic Routing

       Basic Configuration And Clock Rate
First router(2621-XM) and add port(WIC-2T) and Follow this Diagram






Go to first router in cli mode and type
          No
          Router>en
          Router#conf t
          Router(config)#int s0/0
          Router(config-if)#ip address 192.168.30.1 255.255.255.0
          Router(config-if)#no shut
          Router(config-if)#clock rate 64000
          Router(config-if)#exit
          Router(config)#int f0/0
   Router(config-if)#ip address 192.168.10.1 255.255.255.0
   Router(config-if)#no shut
          Router(config-if)#exit

Go to second router in cli mode
          No
          Router>en
          Router#conf t
          Router(config)#int s0/0
          Router(config-if)#ip address 192.168.30.2 255.255.255.0
          Router(config-if)#no shut
          Router(config-if)#exit
          Router(config)#int s0/1
          Router(config-if)#ip address 192.168.40.1 255.255.255.0
          Router(config-if)#no shut
          Router(config-if)#clock rate 64000
          Router(config-if)#exit
          Router(config)#int f0/0
          Router(config-if)#ip address 192.168.20.1 255.255.255.0
          Router(config-if)#no shut
          Router(config-if)#exit

Go to Third router in cli mode
          No
    Router>en
          Router#conf t
    Router(config)#int s0/0
          Router(config-if)#ip address 192.168.40.2 255.255.255.0
          Router(config-if)#no shut
          Router(config-if)#exit
          Router(config)#int f0/0
          Router(config-if)#ip address 192.168.50.1 255.255.255.0
          Router(config-if)#no shut
          Router(config-if)#exit

Step 2 Routing  

 In First Router
First check network in (Router# Show ip route)
Then type
Router#conf t
Router(config)#router rip
Router(config-router)#network 192.168.10.0
Router(config-router)#network 192.168.30.0

In Second router
Router# Show ip route
Router#conf t
Router(config)#router rip
Router(config-router)#network 192.168.20.0
Router(config-router)#network 192.168.30.0
Router(config-router)#network 192.168.40.0

In Thrid router
Router# Show ip route
Router#conf t
Router(config)#router rip
Router(config-router)#network 192.168.40.0
Router(config-router)#network 192.168.50.0


To check Send Packet's Between Networks



                                     -------------END----------------





No comments :

Post a Comment

Subscribe to: Post Comments ( Atom )

Contact Form

Name

Email *

Message *